Expert Answers about Chevrolet Trailer Jack

• Recommended Replacement Jack For Shelby Bolt On Boat Trailer Jack
• I recommend using the Xtreme Off-Road Swing-Up Trailer Jack # ORJW350D as we do not have a jack which will fit the same weld on bracket you have on your boat trailer. This jack can be bolted onto your frame and will allow you to have more adjustability than your current jack. It also has a dual wheel setup which will make it easier to mover around the trailer.
  view full answer...


• Replacement For A Shelby 5135 Snap Ring Trailer Jack
• The Shelby trailer jacks have been discontinued for quite some time. We have found that the Fulton brand jacks, such as the # FTJ120W0301, will fit the snap ring mounting plate for your Shelby jack. This is a 1.2K capacity jack with 10" of lift. I was not able to find any specs online for the Shelby jack you mentioned. If a more heavy duty jack is needed for your trailer, feel free to send me some specs and I am happy to make a recommendation.
  view full answer...


• Replacement A-Frame Coupler and Jack For Big Tex Trailer With Atwood 88555 2" Trailer Coupler
• You will need to replace your entire coupler assembly as the Atwood coupler that you have is obsolete and they are not producing any parts for it. I recommend replacing it with the Demco A-Frame Trailer Coupler # DM14791-97. This coupler uses the same 2" size hitch ball of your Atwood coupler and the eZ-Latch coupler will make connecting to your trailer much easier as you no longer need to raise the latch. You will be able to mount any A-Frame style jack that has a 2-1/4" diameter outer...
  view full answer...


• Replacement Power Tongue Jack For a 2020 Keystone Passport Grand Touring Travel Trailer
• I recommend replacing your Lippert 1817941 with a Bulldog Powered Drive Trailer Jack # BD500199 on your 2020 Keystone Passport Grand Touring Travel Trailer. These type of jacks offer very few replacement parts and I do not see that anyone has replacement gears for their power tongue jacks including your Lippert jack. If the jack were under warranty they would replace the jack rather than just the gear. The jacks that offer replacement gears are generally jacks that are frame welded to the...
  view full answer...


• Electric Trailer Jack Recommendation for a 2005 Keystone Sprinter Travel Trailer
• I have two different electric jack recommendations for your 2005 Keystone Sprinter and it all really depends on what you already have, and what you're looking for. If you're replacing an existing electric jack that's powered by an onboard battery I recommend the etrailer Electric Jack w/ Footplate # EJ-3520-BBX which is a simple, yet effective, jack that splices right in to your existing wiring. If you're adding an electric jack in place of a manual jack I recommend the Buyers Products...
  view full answer...


• Replacement Jack for Circle J 2-Horse Trailer
• We offer all types of trailer jacks that are shown on the linked page. These include a-frame tongue jacks like those supplied on many Circle J trailers I checked. These jacks are available in weight capacities from 750- to 5000-lbs. Just click on your preferred type using the filters on the page - sidewind or topwind - and whether or not you need a drop leg, and foot or wheel. You can also choose a jack based on how much lift it provides. For example, for a 3K-lift-rated sidewind jack...
  view full answer...


• Replacement Tongue Jack With Wheel For 2000 MasterCraft Prostar 205 Boat Trailer Not Bolt-On
• The mounting plate on your 2000 MasterCraft Prostar 205 trailer is obsolete. If you are wanting to stay away form a bolt on style jack I recommend the Fulton Round, Snap-Ring Swivel Marine Jack # FTJ120W0301. This includes a plate you can have welded onto your frame in place of your current mounting bracket. The jack itself fits onto the plate and is held in place with a snap-ring.
  view full answer...


• Replacement Handle Recommendation for a 1250 lb Dutton-Lainson Trailer Jack
• I spoke with my contact at Dutton-Lainson and he stated that the 203960B number that you pulled from your jack is a label number. That label was used on two different trailer jacks with a 1250 lb weight capacity, sidewind jack # 6814 and topwind jack # 6817. The Dutton-Lainson Replacement Handle, # DL22448, is designed to fit the sidewind style jack # 6814. If you have a sidewind style jack, then this handle will fit your jack. If you have a topwind style jack, then you will want the...
  view full answer...


• Replacement Upper And Lower Cover For The Lippert Electric Trailer Jack 1817941
• For your Lippert Electric Trailer Jack 1817941, the correct bottom jack cover is the Replacement Bottom Jack Cover with Light Lens for Lippert Electric A-Frame Trailer Jacks # LC23UD. If you ever should need the top cover as well, you can use the Replacement Top Cover for Lippert Electric Trailer Jack # LC285160.
  view full answer...


• Trailer Jack Recommendation that Can Fit on Shelby Jack Pipe Mount
• We have the Fulton trailer jack part # FTJ120W0301 that we've heard back from customers who said it fit onto the pipe mount of a Shelby trailer jack.
  view full answer...


• Replacement Jack Options For a Shelby 4587 Trailer Jack On a Boat Trailer
• I have a couple options for you to consider as no one makes a jack that will bolt on in place with your Shelby 4587 jack bracket you have welded to your frame. First the Round Swivel Marine Jack w/ Wheel # MJ-1200B is the closest we have to the design of your jack. This will bolt to your trailer frame either just behind your current welded jack bracket or you can have the bracket cut off and install the jack in the same place. The Xtreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels...
  view full answer...


• Trailer Jack Handle or Trailer Jack Replacement for 2010 Venture Trailer
• If the trailer jack is a Fulton brand as you stated, then the Replacement Sidewind Handle Kit for Pro Series or Fulton Marine Jacks # F0933305S00 is the correct replacement. Based on your description I don't see any replacement options compatible. I recommend replacing the entire jack and have linked the page to your options.
  view full answer...


• Availability of Replacement for Center Mount Jack for Ranger Boat Trailer
• It is possible that Fulton jack # FTJ120W0301, which you reference, is the same jack that is used on your Ranger boat trailer. If your current obsolete jack is a side wind swivel jack with 10 inches of lift and rated for 1,200 pounds and it mounts to a bracket welded to the trailer frame and held to it with a snap ring, then yes, this is the correct jack. I have linked a video review of this jack for you. I have also included a link to all of the Fulton side winding swivel jacks for you.
  view full answer...


• Replacement Jack Rod and Nut For 10k/12k Trailer Jack
• The only replacement rod and nut we offer for a trailer jack with a 10,000 lb lift capacity and a 12,000 lb static capacity is the Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks - 12K # TJD-12000-RODNUT. This is for TJD-12000 Series jacks such as the Square Direct Weld Jack # TJD-12000SP-F2.
  view full answer...


• Replacement A-Frame Trailer Jack for Sidewind Style
• If you can send me a photo of the trailer jack I would be more than happy to help you find a replacement, but unless the jack is still under warranty we won't be able to swap it outright with what came on your trailer when you purchased it.
  view full answer...


• Electric Jack Replacement Parts for a 2017 Jayco White Hawk Travel Trailer
• While we do not carry just the tube for your 2017 Jayco White Hawk Travel Trailer's electric jack, we do carry other replacement parts for the jack and full-on replacement jacks. As a full replacement, the etrailer Electric Jack - A-Frame, part # EJ-3520-BBX, can be used. I've linked to a video review of this jack for you to look at. There are other parts of this electric jack that we carry replacements for, including the Foot, part # EJ-3520-FT.
  view full answer...


• Replacement Manual Jack for Atwood Powered Trailer Jack
• Yes the Pro Series A-frame jack part # PSRV20000103 will work great as a replacement for the powered Atwood jack you have now on your trailer. It will easily bolt up in place of it and would have more than enough lifting capacity for your trailer that would weigh up to 7,000 lbs. For a foot for this jack we have the part # PS1400700340.
  view full answer...


• Replacement Options For Travel Trailer Jack With Atwood 75722 Motor
• We have found that the Replacement Motor # LG-142178 can be used to replace your Atwood 75722 motor you have on your 2013 Jayco travel trailer. I would recommend upgrading your entire jack to the Lippert Smart Jack Electric Trailer Jack # LC643589. This will ensure you get all new components in the event your current jack has excessive wear and that is what caused your current motor to fail. The smart jack allows you to program a hitch height for the jack making it easier to raise your...
  view full answer...


• Will the Replacement Cap for Electric Trailer Jack with Footplate Work With Ram Jacks
• The Replacement Cap for Electric Trailer Jack with Footplate part # EJ-3520-BCP works with both etrailer and RAM trailer jacks so if your old plug has this same design then it will work well as a replacement. That said, this is the only plug we offer for etrailer and RAM electric trailer jacks.
  view full answer...


• Selecting a Replacement Swivel Jack for a Venture Boat Trailer
• Thank you for submitting a photo of your boat and trailer showing the trailer's bolt-on Fulton side-wind caster wheel swivel jack which you want to replace. When it comes to jacks - or for that matter to hitches - extra capacity is always a good thing. Since the incremental cost to go from a 1000-lb-rated jack to a 1600-lb-rated one is so small, it just makes sense to select a jack with more capacity than you need. This will help the jack last longer and make cranking it easier. The link...
  view full answer...